INSTRUCTIONS FOR USE Pro-Ject Receiver Box
Dear music lover, thank you for purchasing a PRO-JECT AUDIO receiver. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Help to protect the environment If you are not going to use the receiver for an extended period of time, e.g. vacation, we suggest to disconnect it from the AC mains.
Remote control Stand-By INPUT ON/OFF CH+ TUNE 0 ON/OFF short press turns the unit on, long press takes it back into standby. Powered on, a short press activates and deactivates mute TUNE VOL- OK VOL+ M1 CH- M2 Volume _ VOL 0 M4 M5 M6 M7 M8 0 VOL + adjust the sound volume Selecting an input 0 INPUT M3 and selects the inputs Selecting the tuning mode 0 OK Pressing (min.
Using the Pro-Ject Receiver Box 87.90 Receiver Box MANUAL Turning on/off Press the rotary selector to switch the receiver on. After power is on the display will briefly show the Pro-Ject logo before changing to the regular display of the input selected. Press and hold the rotary selector for a few seconds to switch the unit off. The display will show POWER OFF and STANDBY. While switching off, the unit saves the settings for input, volume and mute, to be set automatically after next power on.
Manual program search Press the rotary selector repeatedly until the display shows MANUAL. By rotating the rotary selector the reception frequency will be increased or decreased in 50kHz steps.
Technical specifications Pro-Ject Receiver Box Power output: Tuning range FM-band: Programmable presets: THD tuner: Stereo separation: Sensitivity: Frequency response: Channel separation: Noise floor: THD amplifier: Gain: Line-level inputs: Input impedance: Antenna input: Outboard power supply: Power consumption: Replacement battery remote control: Dimensions W x H x D (D with sockets): Weight: 2 x 20W/30W at 8ohms/4ohms (both channels driven) 87,5 - 108,5MHz (50kHz steps) 99 0,05% / ∆f 75kHz and f mod 1kH