INSTRUCTIONS FOR USE Pro-Ject Debut Carbon Phono/USB
11 13 11 16 6 30 1 0 5 17 6a 15 3 21 9a 2 4 1 7 5 8 18 9 19 20 17 9a 22 23 3a 10 12 11 14 2 © Audio Trade GmbH · Pro-Ject Debut Carbon/Phono USB / Ortofon OM10 · Revision 2013.11.
Pro-Ject Debut Carbon Phono/USB Controls, features and connections 1 2 3 4 5 6 7 8/18 9 10 11 12 13 14 15 16 17 19 20 21 22 23 Motor brackets with Sorbothane® pads Stepped drive pulley Drive belt * 3a Hook * Hub Platter with felt mat * Tonearm counterweight * 6a Downforce scale Tonearm lift lever Tonearm rest and removable transport lock Tonearm tube 9a Tonearm base Lid * Lid hinges Hinge fasteners Mains lead Phono output sockets, earth connection and USB-out Anti-skating stub with anti-skating weight adju
Set-up The deck is supplied partially disassembled and carefully packaged for safe transport. Carefully remove all parts from the transport packaging. Make sure the surface you wish to use the turntable on is level (use a spirit level) before placing the turntable on it. Remove the transport lock (18) from the tonearm. Store it in the original packaging so it is available for any future transportation. Fit the drive belt (3) around the hub (4) and the smaller diameter part of the motor pulley (2).
Connection to the amplifier The record player has gold plated female RCA phono sockets (14) so you can substitute the interconnect cables supplied with higher quality cables such as the Pro-Ject Connect it interconnect cables for connection to the amplifier if you wish. Use a line input (such as AUX, CD, Tuner, Tape or Video) on your amplifier. Due to the built in phono pre-amplifier, a phono input (sometimes labelled gram, disc or RIAA) is not ! suitable.
Changing replay speed To play records at 45 r.p.m. first remove the platter (5). Using the accessory tool provided (3a), hook the belt (3) over the larger diameter part of the motor pulley (2). Refit the platter. To revert to 33 r.p.m. repeat the proceedings using the smaller step on the pulley. Fitting and connecting the cartridge ** All cartridges with half inch mounting holes can be fitted.
Technical specifications Pro-Ject Debut Carbon Esprit / Pro-Ject 8.6cc Nominal speeds Speed variance Wow and flutter Signal to noise Effective tonearm mass Effective tonearm length Overhang Power consumption Voltage Dimensions (W x H x D) Weight 33/45 r.p.m.
Service Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country. Guarantee repairs will only be effected if the unit is returned correctly packaged. For this reason we recommend keeping the original packaging.
Accessories Lid Tomearm transport look Tonearm counterweight Platter © Audio Trade GmbH · Pro-Ject Debut Carbon/Phono USB / Ortofon OM10 · Revision 2013.11.
