Instruction Manual

Service

Should you encounter a problem, please contact your dealer for further advice. Only when the problem

cannot be resolved there should the unit be sent to the responsible distributor in your country.

Never return a tonearm without making sure that is it safely disassembled and correctly packaged in the

original packaging. Guarantee repairs will only be effected if the unit is returned correctly packaged. For this

reason we recommend keeping the original packaging.

Please remove these parts and pack them separately: tonearm base (10), counterweight (8), anti-skating

weight (7) and cartridge.

PRO-JECT is a Registered Trademark of H. Lichtenegger.

This guide was produced by: Audio Trade GmbH

The information was correct at the time of going to

press. The manufacturer reserves the right to make

changes to the technical specification without prior

notice as deemed necessary to uphold the ongoing

process of technical development.

Technical specifications

1”= 2,54cm Pro-Ject 9cc

Evolution

Pro-Ject 10cc

Evolution

Pro-Ject 12cc

Evolution

Headshell 0,5” standard:

8 8 8

Mounting distance arm base 212mm 238mm 291,6mm

Armtube made of carbon-fibre carbon-fibre carbon-fibre

Headshell made of carbon-fibre carbon-fibre carbon-fibre

Eff. tonearm length 9“ 10“ 12“

Eff. tonearm mass 8g 8,5g 10,5g

Overhang 18mm 16mm 13,2mm

Supplied counterweights for 5 - 7,5g (no. 28) 4 - 6g (no. 30) 4 - 7g (no. 27)

cartridge weights 7 - 10g (no. 46) 5 - 8g (no. 46) 6 - 9g (no. 31)

counterweight no. ( ) 9 - 11g (no. 43) 6 - 10g (no. 44) 8 - 12g (no. 32)

10 - 14g (no. 29) 8 - 14g (no. 31) 10 - 15g (no. 33)

Optional counterweights

counterweight no. ( )

------- 16 - 22g (no. 33) 16 - 22g (no. 47)

Downforce range 10 - 35mN 10 - 35mN 10 - 35mN

Weight (without counterweight) 265g 269g 271g

All tonearms are available either with flying leads terminated with a 5-pole standard tonearm

socket, or with a cable terminated with RCA phono sockets.