INSTRUCTIONS FOR USE Pro-Ject 6 PerspeX
14 11 11 17 13 24 3 C 2 20 14 4 6 16 6a 15 9a 1 23 9 5 B 7 8 18 1 1 A 21 10 11 11 12 14 22 2 © Audio Trade GmbH · Pro-Ject 6 PerspeX · Revision 2012.7.
Pro-Ject 6 PerspeX Controls, features and connections 1 2 3 4 5 6 7 8/18 9 10 11 12 13 14 15 16 17 20 21 22 23 24 A, B, C Sub-chassis transport screw Drive pulley Drive belt * 3a Hook * Operation indicator Sandwich platter * Tonearm counterweight * 6a Downforce scale Tonearm lift lever Tonearm rest and removable transport lock Tonearm tube 9a Tonearm base Lid * Lid hinges Hinge fasteners Power supply socket Phono output sockets and earth connection Anti-skating weight adjustment scale Anti-skating weight *
Set-up The deck is supplied partially disassembled and carefully packaged for safe transport. Carefully remove all parts from the transport packaging. Screw the three feet (22) onto the threaded bolts located on the underside of the plinth. Place the Sorbothane® pad and the motor unit (23) in the mounting at the rear left of the plinth. The power supply socket (13) must line up with the cable channel in the plinth.
Cartridge downforce adjustment The counterweights (6) supplied are suitable for cartridges weighing between 5 - 7,5g (counterweight no. 28), 7 - 10g (counterweight no. 46), 9 - 11g (counterweight no. 43) or 10 - 14g (counterweight no. 29). Adjust the downforce prior to installing the anti-skating weight. Pushing carefully, turn the counterweight (6) onto the rear end of the tonearm tube (9), so that the downforce scale (6a) shows towards the front of the player.
Connection to the amplifier The record player has gold plated female RCA phono sockets (14) so you can substitute the interconnect cables supplied with higher quality cables such as the Pro-Ject Connect it interconnect cables for connection to the amplifier if you wish. Use the Phono input (sometimes labelled gram, disc or RIAA) on your amplifier. Make sure that the phono input offers correct matching and amplification for the type of cartridge used.
Potential incorrect use and fault conditions Pro-Ject turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included. The platter doesn't turn although the unit is switched on: The unit is not connected to the mains power supply.
Accessories Counter weights 3 Subchassis transport locks ! Please remove feet bevore repacking Feet Power supply Motor with black cover Platter Platter support 8 © Audio Trade GmbH · Pro-Ject 6 PerspeX · Revision 2012.7.
