INSTRUCTIONS FOR USE Pro-Ject Pre Box RS Digital
Dear music lover, thank you for purchasing a Pre Box RS Digital from Pro-Ject Audio Systems. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Inputs In1 USB: is dedicated for a connection to a Computer. Connect the USB-input of the unit (unit must be switched on) to a free USB-socket on your computer and turn it on/make sure it is powered on. The Pre Box RS Digital will be recognized by the computer automatically. 24Bit/192kHz driver (Windows® operating systems only) * For Windows® operating systems a 24Bit/192kHz driver has to be installed. Insert the included CD into the drive of your PC and follow the instructions.
Front panel Headphone connection Connect the headphones to the socket on the front panel (Jack 6,3mm) and select proper impedance with the switch (OUT Ohm) next to headphone socket. (When using headphones, main outputs XLR & RCA will not be muted.) To switch on from standby or to standby The switch on the left hand side of the front panel turns the unit on or back into standby. The blue LED above the stand-by switch shows that the unit is switched on.
DSD settings Pro-Ject Pre Box RS Digital is capable of playing DSD64 and DSD128 files. For playing DSD files a dedicated software player is required, which is also capable to play these files (for example JRiver Mediacenter, Foobar2000 etc.). Required settings for DSD: DSD Playback Method: DoP (DSD over PCM), DoP Marker 0x05/0xFA. DSD requires high data rate and slower computers may have problems with playing DSD.
Service Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should be sent to the responsible distributor in your country. Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use.
