INSTRUCTIONS FOR USE Pro-Ject Pre Box DS
Dear music lover, thank you for purchasing a PRO-JECT AUDIO preamplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Connectors 18V Make all connections whilst the preamplifier is disconnected from the power supply. Take care to connect the left and right channels correctly. The right channel is usually marked red, the left channel black or white.
Remote control 1 ON/OFF ON/OFF short press turns the unit on, long press takes it back into standby. Powered on, a short press activates and deactivates mute CH+ 0_ and 0_ and VOL VOL+ VOL- CH- CH 0 adjust the sound volume 0 select the inputs VOL + CH + Front panel controls - + Pre Box DS To switch on from standby or to standby turns the unit on or back into standby (press and hold to switch into standby mode). The display shows STANDBY when the unit is in standby.
Replacing batteries Proceed as follows: Unlock and slide open the battery case cover Replace the battery. Make sure the battery is the right way round ! Close the battery case cover Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the appropriate collection sites - usually located at supermarkets and drugstores.
