User guide

INSTRUCTIONS FOR USE

Pro-Ject Phono Box II

PAGE 1
INSTRUCTIONS FOR USE Pro-Ject Phono Box II
PAGE 2
Dear music lover, thank you for purchasing a PRO-JECT AUDIO phono amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Setting the cartridge mode The phono amplifier must be used in either MM (moving magnet) or MC (moving coil) mode according to the construction principle of the pickup cartridge to be used.
PAGE 3
Technical specifications Pro-Ject Phono Box II Input impedance, MM / MC: Gain, MM / MC: Output voltage typically, MM / MC: Max. output: Noise floor, MM / MC: THD, MM / MC: RIAA-equalisation curve accuracy: Input: Line-level output: Outboard power supply: Power consumption: Dimensions W x H x D (D with sockets): Weight: 47kohms/120pF / 100ohms/120pF 40dB / 60dB 300mV at 1kHz - 3mV (MM Input) / 0,3mV (MC input) 9,5V (1kHz) 86dB (94dB - A weighted) / 68dB (75dB - A weighted) 0,01 / 0,05% 20Hz - 20kHz / max.