INSTRUCTIONS FOR USE Pro-Ject Phono Box II USB
Dear music lover, thank you for purchasing a PRO-JECT AUDIO phono amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Setting the cartridge mode The phono amplifier must be used in either MM (moving magnet) or MC (moving coil) mode according to the construction principle of the pickup cartridge to be used.
Connecting to a Computer (Windows XP® operating system) 1. Connect the USB-output of the Phono Box USB to a free USB-socket on your computer and turn it on/make sure it is powered on. Please note: Connection should be made to an USB-socket of your computer directly. Connecting to USB-hubs or switches can cause problems. 2. The “new hardware found assistant“ will automatically detect the unit and announces it as a “USB audio codec”. 3.
Connecting to a Computer (Windows 7® operating system) 1. Connect the USB-output of the Phono Box USB to a free USB-socket on your computer and turn it on/make sure it is powered on. Please note: Connection should be made to an USB-socket of your computer directly. Connecting to USB-hubs or switches can cause problems. 2. Open the "Recording” panel.
Connecting to a Computer (Mac OS operating system) 1. Connect the USB-output of the Phono Box USB to a free USB-socket on your computer and turn it on/make sure it is powered on. Please note: Connection should be made to an USB-socket of your computer directly. Connecting to USB-hubs or switches can cause problems. 2. Open the “System Preferences” panel and select “Sound”. 3. In the “Input” panel “USB Audio CODEC” should be selected (usually preselected). 4.
Technical specifications Pro-Ject Phono Box II USB Input impedance, MM: Input impedance, MC: Gain, MM: Output voltage typically: Gain, MC: Output voltage typically: Max.
