INSTRUCTIONS FOR USE Pro-Ject Phono Box DS+
Dear music lover, thank you for purchasing a PRO-JECT AUDIO phono amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Front panel controls - + Phono Box DS+ To switch on from standby or to standby turns the unit on or back into standby (press and hold to switch into standby mode). The display shows STANDBY when the unit is in standby. After power on, the current settings are displayed for approx. ten seconds. Pressing again, will display the settings again.
Technical specifications Pro-Ject Phono Box DS+ A Typical for low output MC cartridges, B typical for MM or high output MC cartridges * Input capacitance is irrelevant for low-output MC cartridges 10ohms, 100ohms, 1kohm A 47pF, 147pF, 267pF and 367pF */47kohms B Together with other input impedance settings without any influence! Input gain: 40 and 45dB B / 60 and 65dB A Noise floor: 90dB (A weighted) at 40dB input gain THD: <0,05% RIAA-equalisation curve accuracy: 20Hz - 20kHz / max.
