INSTRUCTIONS FOR USE Pro-Ject Phono Box DS
Dear music lover, thank you for purchasing a PRO-JECT AUDIO phono amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Stand-By The button on the left hand side of the front panel alternately turns the power on or returns it to standby mode. The blue LED above the stand-by push button shows that the unit is switched on. Settings The three push buttons on the left hand side are used to set input impedance, input capacitance and input gain. To find out which type your cartridge is please consult the literature accompanying your cartridge.
Technical specifications Pro-Ject Phono Box DS A Typical for low output MC cartridges, B typical for MM or high output MC cartridges * Input capacitance is irrelevant for low-output MC cartridges Input impedance: Input capacitance / impedance: Input gain: Noise floor: THD: RIAA-equalisation curve accuracy: Subsonic filter: Input: Line-level output: Outboard power supply: Power consumption: Dimensions W x H x D (D with sockets): Weight: 10ohms, 100ohms, 1kohm A 47pF, 147pF, 267pF and 367pF */47kohms B 40 B
