INSTRUCTIONS FOR USE Pro-Ject Media Box S
Dear music lover, thank you for purchasing a PRO-JECT AUDIO Media Box S. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions ! AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Remote control To switch on from standby or to standby POWER USB/SD POWER Input selection ENTER USB/SD 7 _5 turns the unit on or back into standby 9 +5 REPEAT selects between card reader and USB Navigating the menu, playlist, main menu 0 FOL + 7 9 8 FOL _ option. and move the curser up and down, to highlight the requested displays the playlist ENTER displays the main menu. Selects the highlighted option, or modes in menus and submenus. Play / Pause 8 starts and pauses playback.
Stepping between tracks, reverse and forward scanning 9 skips to the next track 7 restarts the current track in playback mode Press and hold the 7 button for reverse scanning, or the button 9 to start forward scanning. Front panel controls Media Box S To switch on from standby or to standby The push button on the left hand side will toggle the player between its fully operational status and standby. The blue LED above the stand-by push button shows that the unit is switched on.
Technical specifications Pro-Ject Media Box S Audio formats: USB input: MP3, WMA, AAC (no DRM support) High-Speed 2.0, 24/96. Typ A-socket. Power supply for 2,5” hard drives (5V DC/max. 500mA) Hard drives: FAT16 and FAT32 (no exFAT or NTFS support) Card reader: SD card (secure digital), max. 32GB Line-level output: 1 pair RCA/phono sockets Output voltage: max. 1Vrms Noise floor 100dBA Digital output: co-axial (S/PDIF) D/A-converter: Texas Instruments TLV320AIC23B.
