INSTRUCTIONS FOR USE Pro-Ject DAC Box S USB
Dear music lover, thank you for purchasing a PRO-JECT AUDIO DAC Box. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Safety instructions AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the voltage in your area meets the voltage requirements printed on the power supply.
Mains power connection Connect the low voltage plug from the power supply to the Power 9V supply to the mains. " socket before connecting the power Front panel controls DAC Box S USB To switch on from standby or to standby The push button on the left hand side will toggle the DAC between its fully operational status and standby. The blue LED above the stand-by push button shows that the unit is switched on.
Service Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country. Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use.
