INSTRUCTIONS FOR USE Pro-Ject CD Box SE
Dear music lover, thank you for purchasing a PRO-JECT AUDIO CD Box. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Help to protect the environment If you are not going to use the player for an extended period of time, e.g. vacation, we suggest to disconnect it from the AC mains.
Remote control ON/OFF Standby +10 STOP 1 ON/OFF turns the unit on or back into standby Volume control 0_ VOL- 0 VOL+ VOL 1 2 3 Stop 5 4 STOP 6 or 0 VOL + adjusts the sound volume of your Pro-Ject Audio amplifier stops playback Play / Pause 7 9 8 8 starts and pauses playback Selecting tracks 1 - 9 +10 and accesses a specific track directly and start playback. +10 For example, to play track 19, press and 9 +10 . To play track 29, press , 2 and 9 .
Front panel controls A B C D E F To switch on from standby or to standby The button A will toggle the player between its fully operational status and standby. The display shows STANDBY when the unit is in standby. Inserting and ejecting a disc Switch the unit on from standby. Insert the disc into the slot, with the label side facing upwards. The slot-loading mechanism will load the disc automatically. The display shows the total number of tracks on the disc and the total duration of the disc.
Replacing batteries Proceed as follows: • • Unlock and slide open the battery case cover Replace the battery. Make sure the battery is the right way round ! • Close the battery case cover Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at the appropriate collection sites - usually located at supermarkets and drugstores.
