User`s manual

17
HOW TO CONNECT YOUR VCR
Note: If your VCR has an unused AUDIO OUT jack,
s
ee instruction A below. If the AUDIO OUT jack is
being used, see instruction B. If you have a TV
w
ith a built-in VCR, see instruction B. If your VCR
is connected to your home stereo, see HOW TO
CONNECT YOUR HOME STEREO on page 16.
A. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
Plug the adapter into the AUDIO OUT jack on your
VCR.
B. Plug one end of the audio cable into the jack on the
front of the treadmill near the power cord. Plug the
other end of the cable into the included adapter.
P
lug the adapter into an RCA Y-adapter (available
at electronics stores). Next, remove the wire that is
c
urrently plugged into the AUDIO OUT jack on your
VCR and plug the wire into the unused side of the
Y-adapter. Plug the Y-adapter into the AUDIO OUT
jack on your VCR.
ADIO OT
R
IGHT
LEFT
IDEO ADIO
A
NT. IN
RF OT
IN
O
T
CH
3
4
Audio
Cable
Adapter
A
IDEO ADIO
A
NT. IN
RF OT
IN
O
T
C
H
3
4
Audio
Cable
Adapter
B
Wire removed from
AUDIO OUT jack
RCA Y-adapter