Operation Manual

b. If the walking belt slips when walked on, ﬁ rst

remove the key and UNPLUG THE POWER

CORD. Using the hex key, turn both idler roller

screws clockwise, 1/4 of a turn. When the walk-

ing belt is correctly tightened, you should be able

to lift each edge of the walking belt 2 to 3 in. (5 to

7 cm) off the walking platform. Be careful to keep

the walking belt centered. Then, plug in the power

cord, insert the key, and carefully walk on the tread-

mill for a few minutes. Repeat until the walking belt

is properly tightened.

SYMPTOM: The incline of the treadmill does not

change correctly

a. Calibrate the incline system (see step 4 on page

28).

SYMPTOM: The iFit workouts do not function

correctly

a. If the iFit workouts are not functioning correctly,

make sure that the treadmill has the most current

firmware available (see step 3 on page 27).

SYMPTOM: The treadmill will not connect to the

wireless network

a. Make sure that the wireless settings on your con-

sole are correct (see step 4 on page 28).

b. Make sure that the settings for your wireless net-

work are correct.

c. If you still have questions, see the front cover of

this manual.