User`s manual

8
5. Tip: Avoid pinching the wires.
Attach each Handlebar (35, 36) to a Handlebar
Post (7) with two M8 x 35mm Button Bolts (64)
and two M8 Locknuts (57). Make sure that the
L
ocknuts are in the hexagonal holes.
5
36
7
7
3
5
57
57
64
64
64
H
exagonal
Holes
Hexagonal
Holes
Avoid pinching
the wires
6
6. Have another person hold the Right and Left
Handlebars (35, 36) near the Upright (6). Insert
the Right and Left Controller/Pulse Wires (54,
67) into the holes in the Upright and pull them
upward out of the top of the Upright.
Tip: Avoid pinching the wires. Attach the
Handlebar Posts (7) to the Upright (6) with two
M8 x 56mm Button Screws (61) and two M8
Locknuts (57).
36
35
67
57
54
6
61
61
7
7
Avoid pinching
the wires