User`s manual

9
7. Attach the Seat Frame (28) to the Frame (1) with
three M8 x 25mm Patch Screws (45) and three M8
S
plit Washers (41).
1
41
4
1
45
45
45
2
8
7
8. Loosen the Seat Knob (11) and pull it outward. Next,
insert the Seat Post (5) into the Seat Frame (28).
Press the Seat Post Cap (54) into the lower end of
the Seat Post (5).
Next, align one of the adjustment holes in the Seat
Post (5) with the indicated hole in the Seat Frame
(28). Then, release the Seat Knob (11) into the Seat
Frame and the Seat Post, and tighten the Seat
Knob. Make sure that the Seat Knob is inserted
through one of the adjustment holes in the Seat
Post.
28
5
11
54
Hole
Adjustment
Holes
8
9. Attach the Seat (12) to the Seat Post (5) with four
M8 Locknuts (10) and four M8 Split Washers (41).
Note: The Locknuts and the Split Washers may be
preattached to the underside of the Seat.
9
41
10
12
5
41
10