User`s manual

5. The Console (16) can use four 1.5V D batteries (not

ncluded); alkaline batteries are recommended.

IMPORTANT: If the Console has been exposed

to cold temperatures, allow it to warm to room

temperature before inserting batteries.

therwise, you may damage the console dis-

plays or other electronic components. Remove

the battery cover, insert the batteries into the bat-

tery compartment, and reattach the battery cover.

Make sure to orient the batteries as shown by

the diagram inside the battery compartment.

To purchase an optional AC adapter, contact the

store where you purchased this product or call

the telephone number on the cover of this man-

ual. To avoid damaging the console, use only a

manufacturer-supplied AC adapter. Plug one end

of the AC adapter into the jack on the console; plug

the other end into an outlet installed in accordance

with all local codes and ordinances.

Batteries

Battery

Cover

6. While a second person holds the Console (16) near

the Upright (13), connect the console wire to the

Upper Wire Harness (36).

Insert the excess wire downward into the Upright

(13).

Tip: Avoid pinching the wires. Attach the Console

(16) to the Upright (13) with four M4 x 16mm

Screws (49).

Avoid pinching

the wires

Console

Wire