User`s manual

7
3
55
41
41
45
45
1
13
20
8
36
3. While a second person holds the Upright (13) in the
position shown, connect the Upper Wire Harness
(36) to the Lower Wire Harness (55).
Carefully pull the excess Upper Wire Harness (36)
o
ut of the top of the Upright (13), and slide the
Upright onto the Frame (1).
Tip: Avoid pinching the Wire Harnesses (36, 55).
Attach the Upright (13) with three M8 x 25mm
Patch Screws (45) and three M8 Split Washers
(41).
Attach the Water Bottle Holder (8) to the Upright
(13) with two M4 x 22mm Screws (20).
Avoid pinching the
Wire Harnesses (36, 55)
4
4. Attach the Handlebar (15) to the Upright (13) with
two M8 x 47mm Patch Screws (9) and two M8
Curved Washers (39).
13
15
9
39
39