User`s manual

10
10. Apply a generous amount of the included
grease to the axles on the Upright (2). Then,
apply a small amount of grease to two Wave
Washers (88).
Slide a Wave Washer (88) onto each axle.
10
9. Identify the Left Upper Body Arm (8), which is
marked with a “Left” sticker. Orient the Left
Upper Body Arm and the left Upper Body Leg
(6) as shown; make sure that the hexagonal
h
oles are in the indicated location.
Slide the Left Upper Body Arm (8) onto the left
Upper Body Leg (6). Attach the Left Upper
Body Arm with two M6 x 36mm Button Bolts
(76) and two M6 Locknuts (77); make sure that
the Locknuts are inside the hexagonal
holes.
Repeat this step for the Right Upper Body
Arm (9) and the right Upper Body Leg (6).
9
8
77
88
88
76
Hexagonal
Holes
6
9
77
2
76
Grease
Axle
Grease