Model No. PATL41306.0 Serial No. USER'S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if any parts are missing or damaged, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT DIRECTLY. Call toll-free: 800-830-7240 E-mail: service@goodfamily.cc Goodfamily’s Web site: www.goodfamily.cc ICON’s Web site: www.iconfitness.com CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 12. Keep the power cord away from heated surfaces. 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 13. Never move the walking belt while the power is turned off.
23. DANGER: Always unplug the power 27. To reduce the risk of electric shock, do not remove the cover or the back of the television. There are no user serviceable parts inside. Refer servicing to qualified service personnel. cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative.
Power Lines Ground Clamp Service Entrance Conductors Standoff Insulators Mast To External Antenna Terminal of Treadmill Service Entrance Equipment Power Service Grounding Electrode System (e.g. Interior Metal Water Pipe) Antenna Lead-in Wire Ground Wire Antenna Discharge Unit Ground Wire Ground Clamps Bonding Jumper Ground Clamps Optional Antenna Grounding Electrode Driven 8 Feet (2.44m) Into The Earth (If Required By Local Codes).
BEFORE YOU BEGIN ing this manual, please see the front cover of this manual. To help us assist you, please note the product model number and serial number before contacting us. The model number of the treadmill is PATL41306.0 The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location). Thank you for selecting the revolutionary PROFORM® 585 PERSPECTIVE treadmill.
Handrail Bolt (64)–4 ASSEMBLY Star Washer packing materials; do not Assembly requires two persons. Set the treadmill in a cleared area and remove allExtension Leg Bolt (96)–4 (84)–2 dispose of the packing materials until assembly is completed. Note: The underside of the walking belt is coated Wheel Nut (13)–2 Extension Leg Bolt (96)–4 with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton.
2. With the help of a second person, carefully raise the Uprights (84) to a vertical position. 2 Console Assembly Have the second person hold the console assembly near the Uprights (84) as shown. Look under the console assembly and locate the Console Wire Harness (78). Remove the tie securing the Upright Wire Harness (77) to the right Upright (84). Next, connect the Upright Wire Harness to the Console Wire Harness (78). Make sure to connect the connectors properly (see the inset drawing).
5. Orient the Latch Housing (73) so the large hole is on the indicated side. Attach the Latch Housing to the left Upright (84) with two Latch Screws (3); start both Latch Screws and then tighten them. 5 84 Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Next, insert the pin into the Latch Housing (73). Then, tighten the knob back onto the pin.
8. Note the location of the 75 ohm antenna terminal on the treadmill. For the television to operate properly, an antenna, a CATV cable, or a VCR must be connected to the 75 ohm antenna terminal (see page 11). 8 75 Ohm Antenna Terminal 9. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included.
Before the personal television can be used, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill frame. Note: No antenna, cable, or adapter is included. HOW TO CONNECT AN ANTENNA 300 Ohm Flat Wire Indoor Antenna 1. See the large drawing near the bottom of this page. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter. 1. Place a VHF antenna in the desired location.
HOW TO USE THE CHEST PULSE SENSOR HOW TO PUT ON THE CHEST PULSE SENSOR • Store the chest pulse sensor in a warm, dry place. Do not store the chest pulse sensor in a plastic bag or other container that may trap moisture. The chest pulse sensor consists of two components: the chest strap and the sensor unit (see the drawing below). Insert the tab on one end of the chest strap into the hole in one end of the sensor unit, as shown in the inset drawing.
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CORD This product must be earthed.
Key Clip FEATURES OF THE CONSOLE cific fitness goals. For example, lose unwanted pounds or train for a long-distance run. iFIT programs automatically control the treadmill while the voice of a personal trainer coaches you and motivates you through every step of your workout. iFIT Cards are available separately. To purchase iFIT Cards at any time, go to www.iFIT.com or call the telephone number on the front cover of this manual. iFIT Cards are also available at select stores.
Km/H. As you exercise, change the speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time a button is pressed, the speed setting will change by 0.1 Km/H; if a button is held down, the speed setting will change in increments of 0.5 Km/H. Note: After the buttons are pressed, it may take a moment for the walking belt to reach the selected speed setting. HOW TO TURN ON THE POWER Plug in the power cord (see page 13). Next, locate the on/off switch near the power cord.
The right display—This display will show the distance that you have walked or run, the speed of the walking belt, the incline level of the treadmill, your pace (in minutes per kilometer), and the approximate number of calories and fat calories you have burned (see FAT BURNING on page 30). This display will also show your heart rate when you use the handgrip pulse sensor or the chest pulse sensor. Next, hold the handgrip pulse sensor with your palms resting on the metal contacts; avoid moving your hands.
When only three seconds remain in the first segment of the program, both the Current Segment column and the column to the right will flash, and a series of tones will sound. If the speed and/or incline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the right display to alert you. When the first segment ends, all speed settings in the matrix will move one column to the left.
4 Next, remove the key from the console and put it in a secure place. Note: If the displays and various indicators remain lit after the key is removed, the console is in the “demo” mode. See HOW TO USE THE INFORMATION MODE on page 24 and turn off the demo mode. Follow your progress with the displays. See step 5 on pages 15 and 16. 5 Measure your heart rate if desired. See step 6 on page 16.
If heart rate program 22, 23, or 24 is selected, a profile of the target heart rate settings of the program will appear in the matrix in the left display. HOW TO USE A HEART RATE PROGRAM During heart rate program 21, your heart rate will remain near a target heart rate setting that you select. During heart rate programs 22, 23, and 24, your heart rate will reach approximately 85% of your age-predicted maximum heart rate.
If heart rate program 22, 23, or 24 is selected, the target heart rate setting for the first segment will be shown in the flashing Current Segment column of the matrix. The target heart rate settings for the next several segments will be Current shown in the columns to the Segment right. When only three secColumn onds remain in the first segment of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound. setting with the Speed or Incline buttons.
tings are not shown in the matrix.) To program a speed setting and an incline setting for the first segment, simply adjust the speed and incline of the treadmill as desired by pressing the Speed and Incline buttons. Every few times a Speed button is pressed, an additional indicator will appear or disappear in the Current Segment column. HOW TO CREATE A CUSTOM PROGRAM 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 15. 2 Select a custom program.
incline setting will flash in the right display, and all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column and the treadmill will automatically adjust to the second speed and incline settings that you programmed previously. HOW TO USE A CUSTOM PROGRAM 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 15. 2 Select a custom program.
During the program, a personal trainer will guide you through the workout. If desired, adjust the volume by pressing the Volume buttons, or select an audio setting for your personal trainer (see HOW TO USE THE INFORMATION MODE on page 24). HOW TO USE AN IFIT CARD 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 15.
HOW TO OPERATE THE PERSONAL TELEVISION HOW TO USE THE INFORMATION MODE The console features an information mode that allows you to view treadmill usage information, select a system of measurement for the console, and turn on and turn off the demo mode. The information mode also allows you to adjust the settings of the television and to save channels into the television’s memory.
2 Press the On/Off button and adjust the brightness, contrast, color, sharpness, and/or hue of the television. 4 To select a video broadcast system for a single channel, first press the Channel buttons until the desired channel number appears on the screen. Then, press the Volume buttons until the desired video broadcast system for the channel appears on the screen. A few seconds after the On/Off button is pressed, the brightness level indicator will appear on the television screen.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Adjust the incline to the lowest position. If this is not done, the treadmill may become permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. Bend your legs, keep your back straight, and raise the frame about halfway to the vertical position.
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see page 13). If an extension cord is needed, use only a 3-conductor, 1 mm2 (14-gauge) cord that is no longer than 1.5 m (5 ft.).
With the help of a second person, carefully raise the Uprights (84) to the position shown. Carefully pivot the Hood (41) off. Locate the Reed Switch (63) and the Magnet (46) on the left side of the Pulley (47). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 3 mm (1/8 in.). If necessary, loosen the Screw (3), move the Reed Switch slightly, and then retighten the Screw.
PROBLEM: Television reception is poor SOLUTION: a. For the television to operate properly, good reception is necessary. If you are using an antenna, make sure that it is properly connected and adjusted for optimal reception. (See HOW TO CONNECT AN ANTENNA on page 11.) b. Check for the problems listed below and follow the applicable instructions.
CONDITIONING GUIDELINES is to burn fat, adjust the speed and incline of the treadmill until your heart rate is near the lowest number in your training zone. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with preexisting health problems. For maximum fat burning, adjust the speed and incline of the treadmill until your heart rate is near the middle number in your training zone.
PART LIST—Model No. PATL41306.0 R0906A To locate the parts listed below, see the EXPLODED DRAWING on pages 32 to 35. Key No. Qty.
5 32 55 53 70 16 52 7 90 40 116 5 9 69 57 33 83 4 3 53 91 5 7 40 9 94 93 116 51 49 1 5 11 54 90 83 48 12 17 6 5 58 70 3 5 10 15 47 5 46 1 11 10 12 94 93 91 5 6 3 15 EXPLODED DRAWING A—Model No. PATL41306.
EXPLODED DRAWING B—Model No. PATL41306.
EXPLODED DRAWING C—Model No. PATL41306.
EXPLODED DRAWING D—Model No. PATL41306.
ORDERING REPLACEMENT PARTS To order replacement parts, call our Customer Service Department toll-free at 800-830-7240, or call: Beijing: 010-60291675 Guizhou: 0851-5617855 Shanghai: 021-28323250 Changchun: 0431-6824991 Ha’erbin: 0451-82712011 Shenyang: 024-31307941 Changsha: 0731-4825618 Hangzhou: 0571-85042441 Shenzhen: 0755-83248325 Changzhou: 0519-8814375 Hefei: 0551-2885888 Shijiazhuang: 0311-86215146 Chengdu: Jinan: 0531-86292209 Suzhou: 0512-67778033 Chongqing: 023-65457730 Ku
