Specifications

Minitrend

GR 21

TVMIGR

TABLE VII

Availability

Factory Use Only Grey Color Bezel, Standard Honeywell labeling 000

Black Color Bezel, Standard Honeywell labeling 014

RESTRICTIONS

Restriction Available Only With Not Available With

Letter Table Selection Table Selection

0 _

0 _, 4 _, P _

Notes:

1. Standard inputs include T/C, mV, V, Ma, Ohms and RTD actuations.

2. Relay Outputs are high level outputs (240VAC/3 Amp non-inductive loads).

3. Discrete Outputs are low level outputs (24VDC/1 Amp non-inductive loads).

Any channel on the 8 or 16 Discrete I/O Card can be used as a Digital Input if not used as an Alarm Output.

4. For 24V Instrument Power, the Input Filter Frequency Noise Rejection can be set for either 50 or 60 Hz

5. Fast Scanning only applies when an input is configured as linear (mV, V, Ma) inputs.

6. 4 Extra Pens; Maximum number of Extra Pens available is 16.

Extra Pens using can be used to write analog values to the recorder the Modbus protocol without needing the full complement of

analog inputs. Using all the virtual pens with many complicated maths and other functions may affect the recorder's performance.

7. Customer must supply tagging information, Up to 3 lines of 22 characters each are allowed

8. Calibration Test Reports/Certificates require specific Range and Input Actuation data from the customer.

Form F3399 Supplemental Data must be completed. This can be downloaded from the www.honeywellprocess.com

9. Software Packages can be ordered separately (see Accessories price page)

10. N/A

11. The 50/60 Hz setting can be changed in the recorder setup to match the local power conditions. It can be ordered set for

either 50Hz or 60Hz. This setting should match the local powerline frequency to provide the best noise rejection.

12. The events currently include: Into, Out of and Alarm Ack, Start, Stop, Reset, Reset & Start Totals, Digital Input ON/OFF/State

Change, T/C Burnout, Mark Chart, Start/Stop Logging, Digital Output ON/OFF,

Scheduled - Once/Interval/Specific Days/Month End, User Counters, Reset Max/Mins, Emails, Screen Change, Print Screen,

Counters - Reset/Increment, Chart Control - Pause/Stop/Resume/Clear/Prefill, Clear All Messages, System - Power ON,

Setup Change, Internal Memory Low, Export Memory Low, FTP Memory Low , User Action - Mark Chart, Batch - Start/Stop/Pause,

Delayed Event, Script Timers - Start/Stop/Reset/Reset & Start, Play Sound - Start/Stop, Display Alert, Reports, TUS - Start/Stop,

AMS2750 Timer - TC Timers/Process Tim ers, Update Tabular Readings.

13. The Printer function can print screens from the Recorder to a PCL type printer.

14. Custom Screen credits provide the ability to load custom screens into the recorder;

the Screen Designer software is required for designing these custom screens at the PC.

15. The recorder supports local language prompts for the following languages: English, French, German, Italian, Spanish,

Brazilian, Polish, Hungarian, Slovakian, Czech, Turkish, Romanian, Russian, Portuguese, Greek, Bulgarian, Chinese,

Korean and Japanese.

16. To write Modbus Slave values to the pens using Modbus Master requires FF Math or MathScripts to assign these values to a pen.

17. AMS2750 Process Mode credits allow the user to monitor T/C Usages, SAT Cal Due Date, TUS Due Date, Instrument Cal

Due Date and Control T/C Due Date.

Selection

Specifications are subject to change without notice.