Operation Manual

10
8. Locate the four M6 x 13mm Screws (95) in the
lower end of the Backrest Frame (94); do not
tighten or remove the Screws.
Insert the heads of the M6 x 13mm Screws (95)
into the slotted holes in the Seat Carriage (4),
and then slide the Screws downward into the
slots.
8
9. Pull the Foot Plate Knob (49), raise the Foot
Plate (68) to the position shown in the inset
drawing, and then release the Foot Plate Knob
into the indicated hole in the Front Frame (1).
9
94
95
4
49
68
68
1
Hole