User`s guide

BEFORE
YOU BEGIN
8
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP 2
BOLT (A)
70 mm
Qty: 2
WASHER (B)
17 mm
Qty: 4
SCREW (C)
Qty: 2
BOLT (D)
55 mm
Qty: 2
NUT (F)
Qty: 2
HARDWARE BAG FOR STEP 2 CONTENTS :
A) Open HARDWARE BAG FOR STEP 2.
B) Attach the REAR WHEEL TRACKS to the MAIN FRAME using 2 BOLTS (A) and 2 WASHERS (B) from the front.
Then, finish securing the REAR WHEEL TRACKS to the MAIN FRAME by inserting 2 BOLTS (D) and 2 WASHERS
(B) from above and secure to 2 NUTS (F) from below.
C) Attach PEDAL ARM COVERS to PEDAL ARMS using SCREWS (C).
MAIN FRAME
REAR
WHEEL
TRACKS
BOLT (A)
WASHERS (B)
PEDAL ARM COVER
SCREW (C)
BOLTS (D)