Operation Manual

11
27
39
25
27
2
11. Lift the Left and Right Link Arms (25, 39) and
set the Rollers (27) on the Track (2). Make sure
that the Rollers are centered on the Track. If
n
ecessary, move the Track to the right or to the
left until the Rollers are centered on the Track.
See step 2. With the help of another person,
tighten the M8 x 50mm Button Screws (65) and
the M8 x 16mm Button Screws (53).
12. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
elliptical exerciser.
11