Specifications

9-18 EM-506 (N-07/03)
MAINTENANCE CHECKLIST - PROFORM PRESS BRAKE
LUBRICATION SCHEDULE
DAILY WEEKLY MONTHLY 3 MONTHS 6 MONTHS YEARLY
1 Check reservoir oil level.
X
2 Lubricate cylinder clevis pin.
X
3 Clean and flush ram guides with oil.
X
4 Check for water in reservoir.
X
5 Lubricate backgage guide rails, bearings and drive screws
X
6
Lubricate Auto Crown® pins (option).
X
7 Drain, clean and refill hydraulic reservoir.
X
8 Lubricate gage bar leveling foot.
X
CHECK OR ADJUSTMENT
1 Check entire machine for loose fasteners – tighten if necessary.
X
2 Wipe entire machine clean.
X
3 Check machine levelness.
X
4 Check ram guide clearance – re-level if necessary.
X
5 Adjust swivel end-guide bearings.
X
6 Replace oil pressure line filter element.
WHEN INDICATED
7 Clean strainer in water line to heat exchanger (if so equipped).
X
8 Replace filter in air-cooled heat exchanger (option).
X
9 Replace reservoir air filter – breather.
X
10 UPS battery should be replaced every two (2) years.
ABOVE INTERVALS ARE BASED ON ONE SHIFT AND NORMAL PRESS BRAKE OPERATION.
DETAILED INSTRUCTIONS FOR SERVICING THE MACHINE CAN BE FOUND IN THIS MANUAL.