User manual

CE Marking Notes

PS3700A-T41-ASU-E66 unit is CE marked, EMC compliant product.

 Safety

EN60950

 EMI

EN61000-6-4, EN55011(Group 1, Class A)

 EMS (EN61000-6-2/EN61131-2)

EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11,

EN61000-4-12

 FCC

47 CFR Part 15 Class A

If the following requirements are not met, the PS-A may fail to meet EN60950 standard requirements.

• The PS-A must be used as a built-in component of an end-use product.

• Use the PS-A indoors only.

• When connecting the PS-A’s power cord, be sure to use a cord that is appropriate for the current and voltage used and

that has conductive wires that are AWG18 or larger.

• There is a danger of explosion if the backup battery is incorrectly replaced. This battery should be replaced only with

same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s

instructions.

• Be sure the PS-A unit’s enclosure is an EN60950 approved sheet steel structure.