User manual

Compact Panel Computer PS-3700A (Eden
TM
ESP6000-667MHz Model) User Manual
5-4
Types of Processing
Detects Backlight alarms. When an alarm occurs, the LED will flash orange/red.
 LED Indicator
The three-color LED is used to indicate PS-A system conditions. It is also used as a power ON/OFF indicator.
The LED is located on the front face of the PS-A unit.
 Pop-up Message Output
This feature displays system status via a Windows
®
pop-up message.
System Monitor Property is used to enable or disable this feature.
 Buzzer Output
This feature uses the PS-A unit’s built-in speaker to alert the operator about PS-A system status.
System Monitor Property is used to enable or disable this feature.
 System Shutdown
This feature shuts down the PS-A unit’s OS.
System Monitor Property is used to enable or disable this feature.
 System Reset
This feature resets the system when the Watchdog Timer reaches “time up”.
System Monitor Property is used to enable or disable this feature.
LED Color System Status Output Created
Green (Lit) Normal Operation (Power ON) None
Orange (Lit)
A RAS alarm has occurred.
LED is enabled via System Moni-
tor Property.
Touch Panel Self-Test Error None
Orange/Red (Lit) Backlight is not functioning. None
• Immediately after the PS-A unit's power is turned ON, if the orange LED lights, a Touch Panel
Self-Test Error may have occurred.