User manual

Compact Panel Computer PS-3700A (Eden

ESP6000-667MHz Model) User Manual

4-6

4.3 Installing Drivers

Four types of dedicated PS-A drivers (4 in 1, Audio, graphic accelerator, and USB 1.1) are available.

Install the required drivers from this data when using a PS-A with no pre-installed OS (A PS-A unit that has

been recovered using the Recovery CD-ROM will have all the required drivers installed). This explanation

given in this section assume that the [Proface] folder has been created.

Installing the 4 in 1 Driver

Installing the 4 in 1 driver makes the followings installed; Chipset, AGP, Miniport and ATAPI.

(1) Double-click on the “VIAHyperion4in1448v.exe” file located in the following folder. Follow the

instructions given to install the driver.

C:\Proface\4in1\VIAHyperion4in1448v.exe

Installing the Audio Driver

Installing the Audio driver enables the OS’Audio feature.

(1) Double-click on the “Setup.exe” file located in the following folder. Follow the instructions given to

install the driver.

C:\Proface\Audio\Setup.exe

Installing the Graphic Accelerator Driver

Installing the Graphic Accelerator Driver will accelerate the screen refresh speed, using special hardware fea-

tures.

(1) Start “C:\Proface\Display\Setup.exe” file.

(2) Select [Next]-[Yes]-[Exit], and then restart the system to complete the installation.

USB 1.1 Driver Installation

This section describes how to install a USB 1.1 driver into your PS-A unit. Doing so ensures that both bottom-

face USB connectors (2 ports) and front-face USB connector (1 port) operate as a USB 1.1 port.

(1) Double-click on the “Setup.exe” file located in the following folder. Follow the instructions given to

install the driver.

C:\Proface\USB\Setup.exe

• Once drivers are installed in the PS-A unit, they cannot be uninstalled.