User manual

Chapter 3 System Setup
3-23
3.2.13 Set Supervisor Password
This password is used to change system information settings. It is designed to prevent unapproved users from
changing the system information settings. Entering up to 8 characters here will overwrite the current pass-
word.
When you wish to have no password, click on the [Enter] key. Next, the words “PASSWORD DISABLE” will
appear, providing confirmation that the Password is no longer set.
When password input is required, use the [Advanced BIOS Features] area’s [Security Option] feature to enter
the password.
3.2.14 Set User Password
This password is used to view system information settings. It is designed to prevent unapproved users from
viewing the system information settings. Entering up to 8 characters here will overwrite the current password.
When you wish to have no password, click on the [Enter] key. Next, the words “PASSWORD DISABLE” will
appear, providing confirmation that the Password is no longer set.
When password input is required, use the [Advanced BIOS Features] area's [Security Option] feature to enter
the password.
3.2.15 Save & Exit Setup
This feature saves the settings entered in the Setup Utility and restarts the PS-A unit.
3.2.16 Exit Without Saving
This feature quits the Setup Utility program without saving any settings entered.
SEE
3.2.3 Advanced BIOS Features (page3-6)
SEE
3.2.3 Advanced BIOS Features (page3-6)
• When using either [Set Supervisor Password] or [Set User Password], you can
easily view and change system settings.
• When using BOTH the [Set Supervisor Password] and [Set User Password] fea-
tures, [Set User Password] will allow you to only view system data, not change it.