User manual

Compact Panel Computer PS-3700A (Eden
TM
ESP6000-667MHz Model) User Manual
3-20
3.2.9 System Monitor Setup
Select PC Health Status from the System Monitor Setup and the following screen will appear.
Warning Voltage +3.3V
When enabled, this setting designates that a warning will be issued if the voltage change exceeds +3.3V’s des-
ignated range. The available settings are [Enabled] and [Disabled]. The factory default setting is [Disabled].
Warning Voltage +5V
When enabled, this setting designates that a warning will be issued if the voltage change exceeds +5V’s desig-
nated range. The available settings are [Enabled] and [Disabled]. The factory default setting is [Disabled].
Warning Voltage +12V
When enabled, this setting designates that a warning will be issued if the voltage change exceeds +12V’s des-
ignated range. The available settings are [Enabled] and [Disabled]. The factory default setting is [Disabled].
Warning Voltage -12V
When enabled, this setting designates that a warning will be issued if the voltage change exceeds -12V’s des-
ignated range. The available settings are [Enabled] and [Disabled]. The factory default setting is [Disabled].
CPU Fan Speed Limit
When enabled, this setting designates the allowed speed range reductions allowed for CPU FAN. The avail-
able settings are [Enabled] and [Disabled]. The factory default setting is [Disabled].
Phoenix AwardBIOS CMOS Setup Utility
System Monitor Setup
Warning Voltage +3.3V [Disabled]
Warning Voltage +5V [Disabled]
Warning Voltage +12V [Disabled]
Warning Voltage -12V [Disabled]
CPU Fan Speed Limit [Disabled]
System Fan Speed Limit [Disabled]
Power Fan Speed Limit [Disabled]
Item Help
Menu Level 4
↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults