User manual

Compact Panel Computer PS-3700A (Eden

ESP6000-667MHz Model) User Manual

3-18

3.2.7 PnP/PCI Configurations

Selecting the PnP/PCI Configuration menu item Displays the following screen.

PNP OS Installed

Available selections are [Yes] and [No]. Be aware that when [Yes] is selected, a plug-and-play compatible OS

can cause interrupts to be re-allocated. The factory setting is [No] and is recommended for normal use.

Reset Configuration Data

Designates whether ESCD (Extended System Configuration Data) data should be erased or not. The two

selections available are [Disabled] and [Enabled]. The [Disabled] selection is factory set and recommended

for most users.

Resources Controlled By

The Plug-and-Play feature allows you to designate whether the allocation of I/O Port, IRQ and DMA

resources is performed automatically or manually. The two selections available are [Manual] or

[Auto(ESCD)]. If [Auto(ESCD)] is selected, the IRQ Resources and DMA Resources selection will be dis-

abled. The [Auto(ESCD)] selection is factory set and recommended for most users.

IRQ Resources

When resources are controlled using [Manual], manually set each IRQ assignment.

SEE

3.2.8 IRQ Resources (page3-19)

Phoenix AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

PNP OS Installed [No]

Reset Configuration Data [Disabled]

Resources Controlled By [Auto(ESCD)]

× IRQ Resources [Press Enter]

PCI/VGA Palette Snoop [Disabled]

Item Help

Menu Level 4

Default is Disabled.

Select Enabled to

reset Extended System

configuration Data

ESCD) when you exit

Setup if you have

installed a new add-on

and the system

reconfiguration has

caused such a serious

conflict that the OS

cannot boot

↑↓→←: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults