User manual

Chapter 3 System Setup

3-17

Video Off Method

This setting determines the method to blank the display screen. The available settings are [Blank Screen], [V/

H SYNC+Blank], and [DPMS]. The [Blank Screen] selection blanks the display. The [V/H SYNC+Blank]

blanks the display and also suspends the Vertical/Horizontal synchronization signal of the display. The

[DPMS] selection controls the operation when a CRT that supports DPMS*

is used. The factory default set-

ting is [DPMS] and is recommended for most users.

Wake Up Events

Pressing the [Enter] key displays the types of events that can be set to trigger the switch between suspend and

normal modes. Designates the mode switched to for each event.

*1 This standard is approved by the VESA (Video Electronics Standards Association).