User manual

Compact Panel Computer PS-3700A (Eden

ESP6000-667MHz Model) User Manual

3-14

Onboard Serial Port 2

Designates the PS-A’s Serial Port2 I/O address and interrupts. The selections include [Disabled], [Auto], [3F8/

IRQ4], [2F8/IRQ3], [3E8/IRQ4] and [2E8/IRQ3]. The [2F8/IRQ3] selection is factory set and recommended

for most users.

Onboard Serial Port 3

Designates the I/O address to be used by the Onboard Serial Port 3.

Available selections are [Disabled], [3F8], [2F8], [3E8] and [2E8]. The factory setting is [3E8] and is recom-

mended for normal use.

Serial Port 3 Use IRQ

Designates the interrupts to be used by the Serial Port 3. The available settings are [Disabled], [IRQ3],

[IRQ4], [IRQ10], or [IRQ11]. The factory default setting is [IRQ11].

Onboard Serial Port 4

Designates the I/O address to be used by the Onboard Serial Port 4.

Available selections are [Disabled], [3F8], [2F8], [3E8] and [2E8]. The factory setting is [2E8] and is recom-

mended for normal use.

Serial Port 4 Use IRQ

Designates the interrupts to be used by the Serial Port 4. The available settings are [Disabled], [IRQ3],

[IRQ4], [IRQ10], or [IRQ11]. The factory default setting is [IRQ10].

Onboard Parallel Port

Selects the PS-A Parallel Port 1’s I/O Address. The selections include [Disabled], [3BC], [378] or [278]. The

[378] selection is factory set and recommended for most users.

Parallel Port Use IRQ

Designates the interrupts to be used by the Onboard Parallel Port 1. The available settings are [IRQ5] or

[IRQ7]. The factory default setting is [IRQ7].

Parallel Port Mode

Here, the parallel port’s operation mode can be selected ([SPP], [EPP], [ECP], or [ECP + EPP]). Normally,

[SPP] is used and recommended for most users. When [Disabled] is not selected, the [SPP], [ECP],

[ECP+EPP 1.9]or [ECP+EPP 1.7], [EPP], [EPP 1.7+SPP]or [EPP 1.9+SPP] or [Normal] setting can be used.