User manual

Chapter 3 System Setup
3-11
PCI Master O WS Write
Designates the wait time used when writing data to the PCI board.
Available selections are [Enabled] and [Disabled]. Selecting [Enabled] means there is no wait time.
The factory setting is [Enabled].
PCI Delay Transaction
Controls the transaction delay function.
Available selections are [Enabled] and [Disabled]. The factory setting is [Disabled].
PCI #2 Access #1 Retry
During AGP (PCI #2) Master Retry, designates if the AGP is to be disconnected or not.
Available selections are [Enabled] and [Disabled]. The factory setting is [Disabled].
AGP Master 1 WS Write
Designates the wait time used when writing data to the AGP.
Available selections are [Enabled] and [Disabled]. Selecting [Enabled] means there is no wait time. The fac-
tory setting is [Disabled].
AGP Master 1 WS Read
Designates the wait time used when reading data from the AGP.
Available selections are [Enabled] and [Disabled]. Selecting [Enabled] means there is no wait time. The fac-
tory setting is [Disabled].