User manual

Compact Panel Computer PS-3700A (Eden

ESP6000-667MHz Model) User Manual

3-4

IDE Primary (Secondary) Master (Slave)

Displays the name of the IDE type Hard Disk connected to the PS-A. Pressing the [Enter] key will call up the

Parameter settings menu. For details,

Drive A

This setting determines the format used by the PS-A’s internal floppy disk drive. The available settings are

[None], [360K - 5.25in], [720K - 3.5in], [1.2M - 5.25in], [1.44M - 3.5in], or [2.88M, 3.5in].

The factory setting is [1.44M - 3.5in], and recommended for most users.

Video

The selections for the screen (video) mode. The available settings are [EGA/VGA], [CGA40], [CGA80] and

[MONO]. The [EGA/VGA] selection is factory set and recommended for most users.

Halt On

Designates the type of processing that will be performed when an error occurs during the Initial Start-Up’s

Self Test. The [All But Keyboard] selection is factory set and recommended for most users.

[All Errors] : Displays all errors and stops the unit.

[No Errors] : Displays all errors and does not stop the unit.

[All,But Keyboard] : Displays all errors, except for those related to the keyboard, and stops the unit.

[All,But Diskette] : Displays all errors, except for those related to the disk drive (FDD), and stops the

unit.

[All,But Disk/Key] : Displays all errors, except for those related to the disk drive (FDD) and key-

board, and then stops the unit.

SEE

3.2.2 IDE HDD Auto-Detection (page3-5)