User manual

Chapter 2 Hardware Installation
2-15
Attach and Secure the Rear Installation Fasteners
(1) Locate the PS-A’s attachment holes, located on the top, bottom, and sides of the PS-A.
• Excessive torque may damage the PS-A unit.
• To ensure a high degree of moisture resistance, the torque should be 0.5N•m.
• Depending on the installation panel's thickness, etc., the number of installation fasteners used
may need to be increased to provide the desired level of moisture resistance.
• The corresponding installation fasteners are CA3-ATFALL-01.
Top
Bottom
Right Side
Left Side
Attachment
Holes
Panel
Installation Fastener
PS-A