User manual

Chapter 1 Overview
1-13
1.5.3 Panel Cut Dimensions
Unit:mm [in]
1.5.4 Installation Fasteners
Unit:mm [in]
• Be sure the thickness of the installation panel is from 1.6 mm [0.06 in] to 10 mm
[0.39 in].
• All panel surfaces used should be strengthened. Especially, if high levels of vibra-
tion are expected and the PS-A’s installation surface (i.e. an operation panel’s
door, etc.) can move (i.e.open or close) due consideration should be given to the
PS-A’s weight.
• To insure that the PS-A’s water resistance is maintained, be sure to install the PS-
A into a panel that is flat and free of scratches or dents.
• Be sure all installation tolerances are maintained to prevent the unit from falling
out of its installation panel.
383.5 [15.10 ]
282.5
[11.12 ]
+1
0
+1
0
l
e
s
s
t
h
a
n
4
-
R
3
[
0
.
1
2
]
+0.04
0
+0.04
0
31[1.22]
16.6[0.65]
Ø10
[Ø0.39]
11[0.43]
16[0.63]
M6