User manual

Chapter 1 Overview
1-5
1.3 PS-A Unit Part Names and Features
Front
Rear
Side
Top
1
2
3
4
5
6
7
8
10 12
11
13
18 20 25 26 28 29
14
15
16 21 23
17
Bottom
22
19 24 27
9
1 : Display / Touch Panel
2 : Power Lamp LED (POWER)
3 : IDE Access Lamp
4 : Front Packing
5 : Hardware Reset Switch (RESET)
Pressing this switch re-starts the PS-A unit.
6 : USB Connector (1 port)
Provides a USB 1.1 compatible connection.
Connect a USB connectable device here.
7 : Arm Attachment Screw Holes
(VESA 75mm)
8 : Power Switch
9 : Expansion Board Support
10 : FD Drive
11 : CD-ROM Drive
12 : PCMCIA Connectors (PCMCIA)(2 ports)
13 : Rear Cover
This cover is removed when installing an HDD unit,
main memory, or Expansion unit (PCI).
14 : Mouse Connector (MOUSE)
Connect a PS/2-compatible mouse here.
15 : Keyboard Connector (KEYBOARD)
Connect a PS/2-compatible keyboard here.
16 : Expansion Slot
17 : LAN Connector (LAN)
(10 BASE-T /100 BASE-TX)
18 : USB Connectors (2 ports)
Provides a USB 1.1 compatible connection.
Connect a USB connectable device here.
19 : RS-232C Connector (COM1)
[+5V/RI Changeover]
20 : RS-232C Connector (COM2)
[+5V/RI Changeover]
21 : RS-232C Connector (COM3)
[RS-485 Changeover]
22 : RS-232C Connector (COM4)
23 : Line Input Connector (LINE IN)
LED PS-A Status
Green
Normal Operation
(Power On)
Orange
System Monitor Error
Touch Panel Self Test Error
Orange/Red Backlight is not functioning
LED PS-A Status
Green Currently using IDE I/F