User manual

Compact Panel Computer PS-3700A (Eden
TM
ESP6000-667MHz Model) User Manual
1-4
1.2.1 Setting Up the Touch Panel Connection
The connection method used can be via either a serial (RS-232C) or USB interface. Depending on the type of
Touch Panel connection used, the OS types that can be used will vary.
DIPSW1
Changes the Touch Panel Communication method (Serial ↔ USB). For the details about the switch,
Mouse Emulator V2(PL-TD000)
When installing the Mouse Emulator, be sure to select USB.
1.2.2 Using the USB Interface (located on the front face)
(Connection example)
SEE
1.4.1 RS-232C Interface (COM1/COM2/COM3/COM4) (page1-7)
• Whenever changing any PS-A switch settings, be sure to first turn the PS-A’s
power supply OFF. Failure to do so can cause a PS-A malfunction.
• If “Serial” is selected, COM4 cannot be used.
• When using multiple commercial-type USB peripheral devices, be sure to use a
commercial-type USB HUB. However, USB HUBS cannot be connected to each
other.
PS-A
USB HUB