User manual

Chapter 7 Specifications
7-5
7.2 Performance Specifications
7.2.1 Performance Specifications
*1 If “Serial” is selected, COM4 cannot be used.
CPU Eden
TM
ESP6000 667MHz (VIA Inc.)
DRAM(SO DIMM) DIMM Socket 1: 128MB/256MB
BIOS Phoenix AwardBIOS (Phoenix Technologies Co.)
Graphics XGA (1024x768 dots)
Video Memory 4MB
Touch Panel
Type Resistive Film (Analog)
Resolution 1024x1024
Interface
COM4
<Switching via hardware>
Use the DIPSW1 to select whether to use the serial communica-
tion (COM4) interface or the USB communication interface. *
1
1.4.1 RS-232C Interface (COM1/COM2/COM3/COM4)
 Switches (page1-8)
<Switching via Software>
When installing the mouse emulator V2 (PL-TD000), select
whether to use the serial communication (COM4) interface or the
USB communication interface.
USB
Interface
Serial
(RS-232C)
COM1 D-sub 9 pin male (RI/+5V switching possible)
COM2 D-sub 9 pin male (RI/+5V switching possible)
COM3 D-sub 9 pin male (RS-485/RS-422 switching possible)
COM4 D-sub 9 pin male
Printer
Complies with Centronics Standards (ECP/SPP/EPP equivalent)
(D-Sub 25 pin, female)
Keyboard PS/2 Interface (mini DIN 6 pin, female) rear 1 port
Mouse PS/2 Interface (mini DIN 6 pin, female) rear 1 port
Disk IDE I/F
Master 2.5inch HDD I/F
Slave CF Card I/F
USB USB 1.1 compatible (front 1 port, rear 2 port)
LAN
IEEE802.3 Standard (auto change to 10 Base-T/100 Base-TX)
(rear 1 port)
PCMCIA Type II (side 2 ports)
Sound
LINE IN, SPEAKER OUT, MIC IN
(rear 3 ports) (standard type AUDIO jack)
PCI Rev.2.2 compatible PCI I/F (5V) (1 Slot)
Floppy Disk Drive 2-mode 3.5 inch floppy disk drive (Side access)
CD-ROM Drive IDE-Type CD-ROM Drive (connected to IDE Secondary) (Side access)
SEE