User manual

Compact Panel Computer PS-3700A (Eden
TM
ESP6000-667MHz Model) User Manual
7-4
7.1.3 Structural Specifications
*1 The front face of the PS-A unit, installed in a solid panel, has been tested using conditions equivalent to
the standard shown in the specification. Even though the PS-A unit’s level of resistance is equivalent to
this standard, oils that should have no effect on the PS-A can possibly harm the unit. This can occur in
areas where either vaporized oils are present, or where low viscosity cutting oils are allowed to adhere to
the unit for long periods of time. If the PS-A’s front face protection sheet becomes peeled off, these con-
ditions can lead to the ingress of oil into the PS-A and separate protection measures are suggested. Also,
if non-approved oils are present, it may cause deformation or corrosion of the front panel’s plastic cover.
Therefore, prior to installing the PS-A, be sure to confirm the type of conditions that will be present in
the PS-A’s operating environment.
If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from
the panel, the original level of the protection cannot be guaranteed. To maintain the original protection
level, Pro-face recommends that you replace the installation gasket regularly.
Grounding 100Ω or less, or your country’s applicable standard
Ratings
*1
Equivalent to IP65f (JEM 1030)
(When Not Using front-face USB Port unit)
Design Type: Modular
Installation method: Panel / VESA Arm
Cooling Method Via Cooling Fans (for Unit/ for CPU)
Weight Approx. 8.0kg (17.6Ib)
Dimensions (W x H x D) 395 mm [15.55 in] x 294 mm [11.57 in.] x 100 mm [3.94 in.]