Installation guide

E-5
1)Place the PS-A unit face down and
unscrew eight (8) attachment
screws. (See diagram)
2)Lift the Rear Cover off of the PS-
A unit.
3)Insert the PSA-HD20 cable
connector completely into IDE I/F.
4)Attach the PSA-HD20 using the
four (4) attachment screws. (See
diagram) The torque should be 0.5
to 0.6 N•m.
5) Replace the PS-A unit's Rear Cover
and reattach eight (8) attachment
screws. The torque should be 0.5 to
0.6 N•m.
IDE I/F
Rear Cover
 
 
When using PS-3701A(Eden
TM
ESP6000 - 667MHz Model)