Specifications

11
 RAS Interface
A D-sub 25-pin plug connector is used.
Stacking Metal Fittings #4-40 inch (UNC)
Pin Arrangement
Pin
No.
Signal Name Meaning
1 GND Ground
2+5V
Output Current : Lower than or equal
to 100mA (with a total of 2 pin and 15
pin)
Output Voltage : 5V+
5%
3+12V
Output Current : Lower than or equal
to 100mA
Output Voltage : 12V+
5%
4NC
-
5RST (+)
Reset Input(+)
6DIN0 (+)
Data Input 0(+)
7
DOUT 2 (-)
(UPS Shutdown(-))
Data Output 2(-) (UPS Shutdown(-))
8
DOUT 2 (+)
(UPS Shutdown(+))
Data Output 2(+) (UPS Shutdown(+))
9 DOUT 0 (-)
Data Output 0(-)
10 DOUT 0 (+)
Data Output 0(+)
11 RST (-)
Reset Input(-)
12 DIN0 (-)
Data Input 0(-)
13 DIN1 (+) Data Input 1(+)
14 GND Ground
15 +5V
Output Current : Lower than or equal
to 100mA (with a total of 2 pin and 15
pin)
Output Voltage : 5V+
5%
16 DIN2 (+)
Data Input 2 (+)
17 DIN2 (-)
Data Input 2 (-)
18 DIN3 (+) Data Input 3 (+)
19 DOUT 1 (-) Data Output 1(-)
20 DOUT 1 (+) Data Output 1(+)
21 DOUT 3 (-) Data Output 3(-)
22 DOUT 3 (+) Data Output 3(+)
23 DIN3 (-) Data Input 3(-)
24 DIN1 (-) Data Input 1(-)
25 NC -
SEE
For the circuit diagram, refer to the “PL-6930/PL-7930 Series User Manual“.
25
14
1
13