Specifications

Chapter 3 Peripheral Device Installation
3-7
• Be sure to use the HDD/CF card unit as Master setting for PL-X930 Series units.
• If you want to use the HDD/CF card unit in the “Expansion Slot1” together with
the CD-ROM drive unit, the setting of the HDD/CF card unit must be “Master” (as
the first disk). To do failure so, it may cause malfunction.
Slave Setting
for use as slave
Master Setting
for use as Master
<PL-HD240>
Slave Setting
for use as slave
Master Setting
for use as Master
When using the PL-HD240 as a Master,
be sure to remove the jumper plug, as
shown in the left side figure.
Jumper Plug
When using the PL-CF200 as a Master,
be sure to shift the switch, as shown in
the left side figure.