Specifications

PL-6930 / PL-7930 Series User Manual
1-10
L: Ethernet Connector (LAN)
Network Interface (meets IEEE802.3 standard /
10BASE-T/100BASE-TX autochangeover).
M: Sound I/O Interface
Used to Speaker output, Line input and Microphone
input.
N: USB Connector (USB)
USB 2.0 compatible devices can be connected here.
O: PCI/ISA board Expansion Slot
Available to use commercial PCI/ISA bus
compatible boards. From the front face side, the slot
names are dubbed as the first slot, the second slot,
the third slot, and the forth slot.
*1
P: HDD/CF card unit expansion slot
These slots aim at installing HDD units or CF card
units. From the front face side, the slot names are
dubbed as the expansion slot0, and the expansion
slot1.
Q: PCMCIA / CARD BUS slot
Available to use a commercial PCMCIA card /
CARD BUS (CARD BUS excepts functions of
ZOOMED VIDEO, SOUND, however).
R: Half Cover
S: Fan Cover
For the 2 slot type (PL-6931 and PL-7931), fan
cover is in the bottom of unit.
T: Changeover Switch for RI/5V
The switch changes the RI/5V state of COM2 or
COM3.
U: DipSW
This is a mask switch for PL setting, which prevents
accidental operation.
*1 For the 4 slot type (PL-6930 and PL-7930), the first slots is available only for ISA bus and the second slot
is only available for PCI bus. For the 2 slot type (PL-6931 and PL-7931) the first slot is available only for ISA
bus.
L
M
O
P
Q
N
R
S
Right Side (4 slot type)
Left Side (4 slot type)
Magnified inside of Rear Maintenance Cover
T
U
V
W
X
SEE
 RI/5V Changeover (page2-13)
SEE
1.1.2 Front Access Port Execution Control
(page1-4)