Specifications

PL-6930 / PL-7930 Series User Manual
7-24
 Error Messages
The following table lists the error messages which concern the remote RAS feature and are displayed by the
Pro-Server during device read/write operations.
7.4.5 Restrictions
 Supported Pro-Server Features
The following table lists the features of the Pro-Server that are supported by the PL.
When using Pro-Server EX
For the details of each feature, refer to “Pro-Server EX Reference Manual”.
• DDE Feature
• Simplified DLL Feature (ProEasy.dll)
• OPC Server Interface
• Data Transfer Feature
• VBA Feature Assist
• Device Data Backup/Restore Feature
• Capture Screen Save Feature
• Device Monitor
• Read Time Measurement
When using Pro-Server with Pro-Studio for Windows
For the details of each feature, refer to “Pro-Server with Pro-Studio for Windows Operation Manual”.
• DDE Feature
• Simplified DLL Feature (ProEasy.dll)
Error Code
Error Message
Decimal
Number
Hexadecimal
Number
9530 253Ah RAS Initialization Error
9531 253Bh Command not supported.
9532 253Ch Access type not supported.
9533 253Dh Read/Write type not supported.
9534 253Eh Access to the device is rejected.
9535 253Fh Value setting to the device/retrieval failed.
65535
(No Code)
FFFFh
Returned when read/write of invalid values or
unsupported device is performed for Voltage,
Temperature, and number of revolution of the FAN.
SEE
For error messages other than listed above, refer to “Pro-Server EX Reference Manual” or “Pro-
Server with Pro-Studio for Windows Operation Manual”.