Specifications

Chapter 7 PL Monitoring Features
7-15
7.3.2 Error Type/Location and Error Action
 Error Type/Location
The error types/locations shown by the Event Viewer are as follows.
 Error Action
Using the Eveint Viewer the following actions can be taken when an error occurs
Error Type Message
Voltage VcoreA VOLT VcoreA Error has occurred.
Voltage VcoreB VOLT VcoreB Error has occurred.
Voltage +3.3V VOLT +3.3V Error has occurred.
Voltage +5.0V VOLT +5.0V Error has occurred.
Voltage +12.0V VOLT +12V Error has occurred.
Voltage -5.0V VOLT -5.0V Error has occurred.
Voltage -12.0V VOLT -12V Error has occurred.
CPU FAN FAN CPU Error has occurred.
System FAN FAN System Error has occurred.
Temperature CPU TEMP CPU Error has occurred.
Temperature
System
TEMP System Error has occurred.
Temperature
System2
TEMP System2 Error has occurred.
DIN0 DIN0 Error has occurred.
DIN1 DIN1 Error has occurred.
DIN2 DIN2 Error has occurred.
DIN3 DIN3 Error has occurred.
Watchdog Watchdog Timer Error has occurred.
Backlight Backlight Error has occurred.
SMART
SMART Error has occurred. Attribute (No.)(Attribute Name) Device
(No.)(HD Model).
The descriptions in the parentheses vary depending on details of occurring
errors and the device where errors occur (0:Master, 1:Slave)
• The data shown in the table’s “” indicate the error type/location.
• The actions to be taken after an error occurs are set via the System Monitor Property screen.