Specifications

PL-6930 / PL-7930 Series User Manual
6-12
6.4.3 When Changing the System Design
When the PL unit is connected to a printer or to a LAN network, the Windows
®
system settings must be
changed.
 Changing the System Design
When the Windows
®
system configuration settings are changed, the following message appears. Enter the
name of the folder where you will save the configuration changes and click [OK].
• When Your PL has No Pre-installed OS
Double-click the [I386] folder in the Windows
®
CD-ROM.
D:\I386 (When the CD-ROM drive is “D”)
• When Your PL has a Pre-installed OS
C:\Proface\Setup\I386
6.4.4 Changing to the NTFS File System
If your OS is formatted with the Windows
®
DOS-compatible file system (FAT32), it can be converted to the
NTFS file system.
To convert to the NTFS file system, start up Windows
®
and use the command prompt.
convert x:/fs:ntfs (Replace “X” with your drive name.)
*1 “xx” is your OS.
Example) When using Windows
®
XP: “Windows XP Professional CD-ROM”
• Insert the CD labeled "Windows
®
xx*
1
Professional CD-ROM" in the CD-ROM drive
(D: ), and click [OK].
• When copying the file from other locations such as network server, also click the [OK]
button.
• Once the file system is converted to the NTFS file system, it cannot be converted back to the
Windows
®
DOS-compatible file system (FAT32).
• In OS pre-install type, the NTFS file system is used.