Specifications

Chapter 5 System Setup
5-25
ICH Control Sub-Menu
Point the cursor to the [ICH Control Sub-Menu] on the [Intel] screen and press the [Enter] Key, so that this
screen will be displayed.
Integrated Device Control Sub-Menu
Goes to the setting screen where an enabled/disabled state for the USB and the LAN and the PCMCIA is
specified.
CPU Sleep
Specifies whether the CPU needs power saving. The choice is [Enabled] or [Disabled]. The factory default
setting is [Enabled].
Deeper Sleep in S1M
Specifies whether the CPU needs power saving in the Standby mode for Windows
®
. The choice is [Enabled]
or [Disabled]. The factory default setting is [Disabled].
PCI Clock Run
Specifies an enabled/disabled state for the usage of PCI Clock Run Protocol for the Card Bus Controller. The
choice is [Enabled] or [Disabled]. The factory default setting is [Disabled].
SEE
 Integrated Device Control Sub-Menu (page5-26)